- The Cupra Born is getting a mid-cycle redesign, with changes focused on the front end.
- The lower bumper will have new vertical intakes pushed to the corners, and the grille opening will be reshaped.
- The rear end will likely remain unchanged, but this test vehicle is sporting some strange sensors on the wheel center caps and a bold sign on the hatch that reads “Bremsen Test” in German (Brake Test).
- There is also speculation that Cupra could be working on a dual-motor performance version of the Born, similar to the Volkswagen ID.3 GTX.
- If this is the case, the Born could get up to 295 horsepower and all-wheel drive.
- We don’t know when the redesigned Cupra Born will debut, but it could be within the next six months.
Here are some additional details
- The Cupra Born is an electric hatchback that was first released in 2021.
- It is based on the Volkswagen ID.3, and shares many of the same components.
- The Born is available with a single electric motor that produces 228 horsepower, or a dual-motor setup that produces 295 horsepower.
- The Born has a range of up to 265 miles on a single charge.
- The redesigned Cupra Born is expected to debut in 2023.
Cupra is working on a mid-cycle refresh for the Born electric hatchback, and the spy photos suggest some significant design changes. Despite the model only debuting in May 2021, the presence of a camouflaged test vehicle in September 2022 indicates that Cupra is keen on updating the Born’s looks relatively quickly.
The spy photos show most of the changes are concentrated on the front of the vehicle. The lower bumper has new vertical intakes pushed to the corners, which likely frame a reshaped grille opening beneath a tweaked nose. At the rear, the only camouflage covers a portion of the full-width taillight element, the badge, and the area around the marking.
Interestingly, the test vehicle sports some strange sensors on the wheel centre caps and a bold sign on the hatch that reads “Bremsen Test” in German, suggesting brake testing. This could indicate some technical updates or adjustments being made to the vehicle’s braking system.
Moreover, there are speculations that the Born might get a more powerful, dual-motor, all-wheel-drive variant, similar to the Volkswagen ID.3 GTX. The ID.3 GTX is rumoured to feature a 295-horsepower dual-motor setup, which, if applied to the Born, could make for a sportier version with more power. However, this AWD variant has not been officially confirmed by Cupra.
Unveiling in next 6 months
Given that the ID.3 GTX is expected to be revealed in 2023, it’s possible Cupra may unveil the refreshed Born within the next six months. This could put a significant time gap between the original debut and the updated version, signalling Cupra’s commitment to keeping the model fresh and competitive in the market.
As with any rumours and speculations, it’s essential to wait for official announcements from Cupra to get accurate and confirmed details about the upcoming changes to the Born model.
The spy photos of the camouflaged Cupra Born suggest that the Spanish performance brand is working on a mid-cycle refresh for the electric hatchback. The test vehicle spotted in September 2022 indicates that Cupra is revising the Born’s design relatively soon after its debut in May 2021.
The front of the vehicle seems to be undergoing significant changes, with a fully covered lower bumper featuring new vertical intakes at the corners, possibly framing a reshaped grille opening. The rear changes appear to be less drastic, with only a portion of the full-width taillight element, badge, and surrounding area being concealed.
There are rumours that Cupra might be considering a more powerful, dual-motor, all-wheel-drive variant of the Born, taking inspiration from the Volkswagen ID.3 GTX, though this has not been officially confirmed.
The presence of sensors on the wheel centre caps and a brake testing sign on the hatch adds an element of mystery to the changes being made. However, it’s crucial to remember that these are speculations, and official information from Cupra is needed to confirm the exact updates and additions.